1999 SRT Dodge Durango — SLT

The 1999 SRT Dodge Durango SLT shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

235/75R15

Section width235 mm
Aspect ratio (sidewall height)75% (176.3 mm)
Rim diameter15"
Overall tire diameter~28.9"
Revolutions per mile~698

Some links on this page are affiliate links — see our disclosure.

31X10.50R15

Overall diameter31"
Section width10.5"
Rim diameter15"
Revolutions per mile~651

Some links on this page are affiliate links — see our disclosure.

Other 1999 SRT Dodge Durango trims

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.