2008 Cadillac XLR-V — Base Model
The 2008 Cadillac XLR-V Base Model shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
235/45R19 (Front)
| Section width | 235 mm |
|---|---|
| Aspect ratio (sidewall height) | 45% (105.8 mm) |
| Rim diameter | 19" |
| Overall tire diameter | ~27.3" |
| Revolutions per mile | ~738 |
Compare prices at:
255/40R19 (Rear)
| Section width | 255 mm |
|---|---|
| Aspect ratio (sidewall height) | 40% (102 mm) |
| Rim diameter | 19" |
| Overall tire diameter | ~27" |
| Revolutions per mile | ~746 |
Compare prices at:
What this size means for your Cadillac XLR-V
On the 2008 Cadillac XLR-V Base Model, the factory 235/45R19 measures about 27.3″ in overall diameter with a 105.8 mm (4.2″) sidewall, and completes roughly 738 revolutions per mile. Its 45-series aspect ratio gives a low-profile sidewall tuned for sharper handling, common on sport trims and larger-wheel packages. In tire terms it is a passenger (P-metric / Euro-metric) size.
This is a staggered setup: the front axle runs 235/45R19 and the rear runs 255/40R19. The two sizes are not interchangeable, so order each for its correct axle and don't rotate front-to-rear.
On a vehicle of this age, the Cadillac XLR-V may have been refitted with a slightly different replacement size somewhere in its life, so check the current sidewall — not just the factory spec — before buying.
Cadillac XLR-V tire sizes by year
- 2009 Cadillac XLR-V 235/45R19 (Front) / 255/40R19 (Rear)
- 2007 Cadillac XLR-V 235/45R19 (Front) / 255/40R19 (Rear)
- 2006 Cadillac XLR-V 235/45R19 (Front) / 255/40R19 (Rear)
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.