2013 Chrysler 200 — Convertible Touring
The 2013 Chrysler 200 Convertible Touring shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
225/55R17
| Section width | 225 mm |
|---|---|
| Aspect ratio (sidewall height) | 55% (123.8 mm) |
| Rim diameter | 17" |
| Overall tire diameter | ~26.7" |
| Revolutions per mile | ~754 |
Compare prices at:
225/50R18
| Section width | 225 mm |
|---|---|
| Aspect ratio (sidewall height) | 50% (112.5 mm) |
| Rim diameter | 18" |
| Overall tire diameter | ~26.9" |
| Revolutions per mile | ~751 |
Compare prices at:
What this size means for your Chrysler 200
On the 2013 Chrysler 200 Convertible Touring, the factory 225/55R17 measures about 26.7″ in overall diameter with a 123.8 mm (4.9″) sidewall, and completes roughly 754 revolutions per mile. Its 55-series aspect ratio gives a balanced everyday-passenger profile — enough sidewall to soak up road shock while keeping steering response crisp. In tire terms it is a passenger (P-metric / Euro-metric) size.
The 225/55R17 and 225/50R18 roll within 0.2″ (0.7%) of each other in overall diameter, so they are interchangeable from a speedometer standpoint — the second size is an optional wheel package rather than a different rolling size.
Other 2013 Chrysler 200 trims
- Convertible Limited 225/50R18
- Convertible S 225/50R18
- Limited 225/50R18
- LX 225/55R17
- Touring 225/55R17 / 225/50R18
Chrysler 200 tire sizes by year
- 2017 Chrysler 200 235/45R18 / 235/40R19
- 2016 Chrysler 200 235/45R18 / 235/40R19
- 2015 Chrysler 200 235/45R18 / 235/40R19
- 2014 Chrysler 200 225/50R18
- 2012 Chrysler 200 225/50R18
- 2011 Chrysler 200 225/50R18
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.