2026 Dodge Charger — Daytona Track Package

The 2026 Dodge Charger Daytona Track Package shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

305/35R20 (Front)

Section width305 mm
Aspect ratio (sidewall height)35% (106.8 mm)
Rim diameter20"
Overall tire diameter~28.4"
Revolutions per mile~710

Compare prices at:

325/35R20 (Rear)

Section width325 mm
Aspect ratio (sidewall height)35% (113.8 mm)
Rim diameter20"
Overall tire diameter~29"
Revolutions per mile~696

Compare prices at:

What this size means for your Dodge Charger

On the 2026 Dodge Charger Daytona Track Package, the factory 305/35R20 measures about 28.4″ in overall diameter with a 106.8 mm (4.2″) sidewall, and completes roughly 710 revolutions per mile. Its 35-series aspect ratio gives an ultra-low-profile, performance-oriented sidewall that favors steering precision over ride cushioning. In tire terms it is a large-diameter fitment.

This is a staggered setup: the front axle runs 305/35R20 and the rear runs 325/35R20. The two sizes are not interchangeable, so order each for its correct axle and don't rotate front-to-rear.

Other 2026 Dodge Charger trims

Dodge Charger tire sizes by year

See every Dodge Charger year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.