2018 Ford Edge — Titanium
The 2018 Ford Edge Titanium shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
245/55R19
| Section width | 245 mm |
|---|---|
| Aspect ratio (sidewall height) | 55% (134.8 mm) |
| Rim diameter | 19" |
| Overall tire diameter | ~29.6" |
| Revolutions per mile | ~681 |
Compare prices at:
245/50R20
| Section width | 245 mm |
|---|---|
| Aspect ratio (sidewall height) | 50% (122.5 mm) |
| Rim diameter | 20" |
| Overall tire diameter | ~29.6" |
| Revolutions per mile | ~680 |
Compare prices at:
What this size means for your Ford Edge
On the 2018 Ford Edge Titanium, the factory 245/55R19 measures about 29.6″ in overall diameter with a 134.8 mm (5.3″) sidewall, and completes roughly 681 revolutions per mile. Its 55-series aspect ratio gives a balanced everyday-passenger profile — enough sidewall to soak up road shock while keeping steering response crisp. In tire terms it is a passenger (P-metric / Euro-metric) size.
The 245/55R19 and 245/50R20 roll within 0″ (0%) of each other in overall diameter, so they are interchangeable from a speedometer standpoint — the second size is an optional wheel package rather than a different rolling size.
Other 2018 Ford Edge trims
Ford Edge tire sizes by year
- 2024 Ford Edge 245/60R18 / 245/55R19
- 2023 Ford Edge 245/60R18 / 245/55R19
- 2022 Ford Edge 245/60R18 / 245/55R19
- 2021 Ford Edge 245/60R18
- 2020 Ford Edge 245/60R18
- 2019 Ford Edge 245/60R18
- 2017 Ford Edge 245/60R18
- 2016 Ford Edge 245/60R18
- 2015 Ford Edge 245/60R18
- 2014 Ford Edge 245/60R18 / 245/50R20
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.