2014 Jeep Grand Cherokee — Laredo
The 2014 Jeep Grand Cherokee Laredo shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
245/70R17
| Section width | 245 mm |
|---|---|
| Aspect ratio (sidewall height) | 70% (171.5 mm) |
| Rim diameter | 17" |
| Overall tire diameter | ~30.5" |
| Revolutions per mile | ~661 |
Compare prices at:
265/60R18
| Section width | 265 mm |
|---|---|
| Aspect ratio (sidewall height) | 60% (159 mm) |
| Rim diameter | 18" |
| Overall tire diameter | ~30.5" |
| Revolutions per mile | ~661 |
Compare prices at:
What this size means for your Jeep Grand Cherokee
On the 2014 Jeep Grand Cherokee Laredo, the factory 245/70R17 measures about 30.5″ in overall diameter with a 171.5 mm (6.8″) sidewall, and completes roughly 661 revolutions per mile. Its 70-series aspect ratio gives a tall sidewall of the kind used on trucks, SUVs, and older passenger cars, built for cushioning and load. In tire terms it is a passenger (P-metric / Euro-metric) size.
The 245/70R17 and 265/60R18 roll within 0″ (0%) of each other in overall diameter, so they are interchangeable from a speedometer standpoint — the second size is an optional wheel package rather than a different rolling size.
Other 2014 Jeep Grand Cherokee trims
Jeep Grand Cherokee tire sizes by year
- 2025 Jeep Grand Cherokee 265/60R18 / 265/50R20
- 2024 Jeep Grand Cherokee 265/60R18 / 265/50R20
- 2023 Jeep Grand Cherokee 265/50R20
- 2022 Jeep Grand Cherokee 265/50R20
- 2021 Jeep Grand Cherokee 265/50R20
- 2020 Jeep Grand Cherokee 265/50R20
- 2019 Jeep Grand Cherokee 265/50R20
- 2018 Jeep Grand Cherokee 265/50R20
- 2017 Jeep Grand Cherokee 245/70R17
- 2016 Jeep Grand Cherokee 265/60R18 / 265/50R20
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.