1976 Jeep Wagoneer — Base Model

The 1976 Jeep Wagoneer Base Model shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

225/75R15

Section width225 mm
Aspect ratio (sidewall height)75% (168.8 mm)
Rim diameter15"
Overall tire diameter~28.3"
Revolutions per mile~713

Compare prices at:

235/70R15

Section width235 mm
Aspect ratio (sidewall height)70% (164.5 mm)
Rim diameter15"
Overall tire diameter~28"
Revolutions per mile~722

Compare prices at:

What this size means for your Jeep Wagoneer

On the 1976 Jeep Wagoneer Base Model, the factory 225/75R15 measures about 28.3″ in overall diameter with a 168.8 mm (6.6″) sidewall, and completes roughly 713 revolutions per mile. Its 75-series aspect ratio gives a tall sidewall of the kind used on trucks, SUVs, and older passenger cars, built for cushioning and load. In tire terms it is a passenger (P-metric / Euro-metric) size.

The 225/75R15 and 235/70R15 roll within 0.3″ (1.1%) of each other in overall diameter, so they are interchangeable from a speedometer standpoint — the second size is an optional wheel package rather than a different rolling size.

Because the 1976 Jeep Wagoneer predates many current tire lines, confirm this size is still stocked before ordering — some vintage fitments are now served mainly by specialty and classic-car tire suppliers.

Jeep Wagoneer tire sizes by year

See every Jeep Wagoneer year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.