2010 Mercedes-Benz SL63 — AMG

The 2010 Mercedes-Benz SL63 AMG shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

255/35R19 (Front)

Section width255 mm
Aspect ratio (sidewall height)35% (89.3 mm)
Rim diameter19"
Overall tire diameter~26"
Revolutions per mile~775

Compare prices at:

285/30R19 (Rear)

Section width285 mm
Aspect ratio (sidewall height)30% (85.5 mm)
Rim diameter19"
Overall tire diameter~25.7"
Revolutions per mile~784

Compare prices at:

What this size means for your Mercedes-Benz SL63

On the 2010 Mercedes-Benz SL63 AMG, the factory 255/35R19 measures about 26″ in overall diameter with a 89.3 mm (3.5″) sidewall, and completes roughly 775 revolutions per mile. Its 35-series aspect ratio gives an ultra-low-profile, performance-oriented sidewall that favors steering precision over ride cushioning. In tire terms it is a passenger (P-metric / Euro-metric) size.

This is a staggered setup: the front axle runs 255/35R19 and the rear runs 285/30R19. The two sizes are not interchangeable, so order each for its correct axle and don't rotate front-to-rear.

On a vehicle of this age, the Mercedes-Benz SL63 may have been refitted with a slightly different replacement size somewhere in its life, so check the current sidewall — not just the factory spec — before buying.

Mercedes-Benz SL63 tire sizes by year

See every Mercedes-Benz SL63 year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.