1992 Pontiac Sunbird — Base Model

The 1992 Pontiac Sunbird Base Model shipped with 3 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.

This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.

185/75R14

Section width185 mm
Aspect ratio (sidewall height)75% (138.8 mm)
Rim diameter14"
Overall tire diameter~24.9"
Revolutions per mile~809

Compare prices at:

195/70R14

Section width195 mm
Aspect ratio (sidewall height)70% (136.5 mm)
Rim diameter14"
Overall tire diameter~24.7"
Revolutions per mile~815

Compare prices at:

195/65R15

Section width195 mm
Aspect ratio (sidewall height)65% (126.8 mm)
Rim diameter15"
Overall tire diameter~25"
Revolutions per mile~807

Compare prices at:

What this size means for your Pontiac Sunbird

On the 1992 Pontiac Sunbird Base Model, the factory 185/75R14 measures about 24.9″ in overall diameter with a 138.8 mm (5.5″) sidewall, and completes roughly 809 revolutions per mile. Its 75-series aspect ratio gives a tall sidewall of the kind used on trucks, SUVs, and older passenger cars, built for cushioning and load. In tire terms it is a small-diameter fitment typical of older or economy vehicles.

The 185/75R14 and 195/70R14 roll within 0.2″ (0.8%) of each other in overall diameter, so they are interchangeable from a speedometer standpoint — the second size is an optional wheel package rather than a different rolling size.

Because the 1992 Pontiac Sunbird predates many current tire lines, confirm this size is still stocked before ordering — some vintage fitments are now served mainly by specialty and classic-car tire suppliers.

Other 1992 Pontiac Sunbird trims

Pontiac Sunbird tire sizes by year

See every Pontiac Sunbird year & trim →

How to read a tire size

A tire size like 225/45R17 breaks down into three parts: the first number is the section width in millimeters (the tire's width from sidewall to sidewall), the second is the aspect ratio — the sidewall's height as a percentage of that width — and the number after the "R" is the rim diameter in inches. A letter prefix (P or LT) indicates Passenger or Light Truck construction; its absence usually means Euro-metric sizing.

Some trucks and off-road tires instead use "flotation" sizing, like 37X12.50R17 — here the numbers are the tire's overall diameter and width in inches directly, with the rim diameter last.

Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.