1993 Toyota Paseo — Base Model
The 1993 Toyota Paseo Base Model shipped with 2 different factory tire sizes, depending on the wheel package it left the factory with (this can also reflect a staggered front/rear setup). Check your tire sidewall or door placard to confirm which one applies to your vehicle.
This trim shipped with more than one tire size (staggered fitment, front/rear, or optional wheel package). Confirm which one matches your vehicle by checking your tire sidewall or door placard.
175/65R14
| Section width | 175 mm |
|---|---|
| Aspect ratio (sidewall height) | 65% (113.8 mm) |
| Rim diameter | 14" |
| Overall tire diameter | ~23" |
| Revolutions per mile | ~879 |
Compare prices at:
185/60R14
| Section width | 185 mm |
|---|---|
| Aspect ratio (sidewall height) | 60% (111 mm) |
| Rim diameter | 14" |
| Overall tire diameter | ~22.7" |
| Revolutions per mile | ~887 |
Compare prices at:
What this size means for your Toyota Paseo
On the 1993 Toyota Paseo Base Model, the factory 175/65R14 measures about 23″ in overall diameter with a 113.8 mm (4.5″) sidewall, and completes roughly 879 revolutions per mile. Its 65-series aspect ratio gives a taller, comfort-biased sidewall that favors ride quality and shrugs off rough pavement. In tire terms it is a small-diameter fitment typical of older or economy vehicles.
The 175/65R14 and 185/60R14 roll within 0.3″ (1.3%) of each other in overall diameter, so they are interchangeable from a speedometer standpoint — the second size is an optional wheel package rather than a different rolling size.
Because the 1993 Toyota Paseo predates many current tire lines, confirm this size is still stocked before ordering — some vintage fitments are now served mainly by specialty and classic-car tire suppliers.
Toyota Paseo tire sizes by year
- 1998 Toyota Paseo 185/60R14
- 1997 Toyota Paseo 185/60R14
- 1996 Toyota Paseo 185/60R14
- 1995 Toyota Paseo 175/65R14 / 185/60R14
- 1994 Toyota Paseo 175/65R14 / 185/60R14
- 1992 Toyota Paseo 175/65R14 / 185/60R14
How to read a tire size
A tire size like 225/45R17 breaks down into three parts:
the first number is the section width in millimeters
(the tire's width from sidewall to sidewall), the second is the
aspect ratio — the sidewall's height as a percentage of
that width — and the number after the "R" is the rim
diameter in inches. A letter prefix (P or LT) indicates
Passenger or Light Truck construction; its absence usually means
Euro-metric sizing.
Some trucks and off-road tires instead use "flotation" sizing, like
37X12.50R17 — here the numbers are the tire's overall
diameter and width in inches directly, with the rim diameter last.
Always verify against the tire information placard on your driver's-side door jamb or your owner's manual before purchasing — tire size can vary by factory option package even within the same trim.